Shop

0

DMM 45kN steel screwgate carabiner

HG-C812
£20.00
In stock
1
Product Details

DMM C812 12mm steel carabiner.

Made for professional safety gear use and certified to EN362:2004/B. These carabiners are serialised and fully traceable so are not just a cheap stand-in but are a fully reliable and safe carabiner and are our recommended replacement to the no longer available AustriAlpin Tropos.

Certified breaking load: 45kN* (12kN* in side axis and with gate open)
Weight: 233 g/pc.
Inner height: 85 mm

* 1 kN = 1000 newton ≈ 100 kg


Info:

During flight, airsport karabiners are exposed to permanently changing loads. By taking measurements at paragliders, the DHV has asserted that these load variations are between ten and more than 110 kg and that they can occur up to 26 times per second.
Construction- and production-conditioned, conventional karabiners exhibit a greater or lesser gate play. The catch of such a karabiner thus becomes actuated by gravity only at tensions between 25 and 110 kg. This means that within the range of the gate play, the karabiner is loaded during flight as if its catch was open.
The thus resulting high dynamic loads make it necessary to replace the karabiner every one- or two years in order to preclude a material fatigue failure.

Save this product for later
Share by: